dampers
-
jonny snatchsniffer
- registered user
- Posts: 277
- Joined: Mon Jan 12, 2009 11:53 am
- Location: camberley, surrey
- Contact:
my mate has some non damper forks and links, how does one go about fitting dampers to them ? the forks aint the problem but the links are
-
Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Replace the none damper links with damper links. Voila!
CakeAndArseParty
-
WINTERMODEL150
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
You can get bolt in damper link brackets that bolt on the end of the spindle from scooter restorations or try mb developments,i've used them for years and they work very well.
Dean
Dean
Do a quick search for username shocky. he welded a set of damper lugs to my links and replated them. very neat welds and good plating.
No sure if he still does them but worth a pm
Jay
No sure if he still does them but worth a pm
Jay
Better to keep quiet and be thought of as a D!ck Head, than to open your mouth and remove all doubt.
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Shocky's yer man 
Turn On, Tune In, Cop out!
-
byron
- registered user
- Posts: 1226
- Joined: Wed Jan 07, 2009 11:45 am
- Main scooter: Li Special; scarred,but sound
- Location: norwich
- Contact:
same here, usually a super quick turnaround tooessexgp wrote:Got to agree there, done two sets for me now, no problems with either
and they are much better than using the adaptor brackets
Got mine back from him today,spot on job and quick turnaround too.
-
Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
He's done some for me too. He's da man!