Page 1 of 1
Lambretta auto conversion
Posted: Tue Apr 19, 2011 12:19 am
by Kenty
Hello all, I am doing an auto conversion using a piaggio hexagon as doner and putting into a gp200, any ideas if a modern rev and go front wheel and disc will fit into lamby forks, they are 10" wheels on the Piaggio
Re: Lambretta auto conversion
Posted: Tue Apr 19, 2011 1:26 am
by RICSPEED
zip front wheels fit but wont match the rear ...some pics may help
Re: Lambretta auto conversion
Posted: Tue Apr 19, 2011 5:39 pm
by e_9111
Yes yes ,,,,,,some pics may help
Re: Lambretta auto conversion
Posted: Tue Apr 19, 2011 9:12 pm
by WINTERMODEL150
Hi, use the hexagen front wheel ,widen the lambretta forks ,make up a spindle and some spacers ,reverse the links from side to side then make an anti dive front brake to suit,done this to mine and it works lovely
.
Dean