Scooterotica

Any more news and pics of the new Ron Moss kit? cheers All

There was info on his facebook page but it got taken down because someone made an allegation of copyright infringement.

I spoke to Ron last week.
All technical details will be released the beginning of May when he hopes to have the first Ally kits up and running.
He has been prototyping the port layout in cast iron for a year but the ally ones allow a configuration not possible with the cast so some differences for the better should occur.

He has showed an interest in doing some of the testing on our dyno so I'm hopeful that will be so but the fact he lives so far away is a pain.

He has good piston backup from a very reputable supplier and the bores will be nicasil lined. Very interested to see how these turn out. With TS1s hard to come by at the moment they should sell well.

Diablo wrote:I spoke to Ron last week.
All technical details will be released the beginning of May when he hopes to have the first Ally kits up and running.
He has been prototyping the port layout in cast iron for a year but the ally ones allow a configuration not possible with the cast so some differences for the better should occur.

He has showed an interest in doing some of the testing on our dyno so I'm hopeful that will be so but the fact he lives so far away is a pain.

He has good piston backup from a very reputable supplier and the bores will be nicasil lined. Very interested to see how these turn out. With TS1s hard to come by at the moment they should sell well.

and the carb is on the correct side too........

Ah good, he sent me an email a while back guestimating April with the problem being getting hands on the pistons i recall. I take it the name supertune is still being disputed with 100mph and ron moss then?