Page 1 of 2
Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 4:22 pm
by AUSSIE
Hi, Is it possible to list a few exhaust that fit with no bodywork mods at all? (no trimmed footboard, no rubbing on panels)
Can people only list them if they know for certain, Thanks Dave
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 4:23 pm
by Dazza
Jl3
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 4:34 pm
by teamsequipe
AF Clubman
Gori Clubman
RMR Clubman
MB Clubman
Scootopia Ancillotti
Casa Clubman
Tino Ancillotti
B Race Snail
Mikeck Snail
JL Snail
etc......
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 4:44 pm
by RICSPEED
under kick fresco (if you can find one)
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 4:46 pm
by SpanishSX200
MB DevTour
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 6:07 pm
by mark
my s2 floorboards had to be cut to fit my jl3
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 8:52 pm
by byron
mark wrote:my s2 floorboards had to be cut to fit my jl3
as I've had to on GPs too, around the bracket area, and a little off the back, but not as much as most other pipes.
I'd have thought any over the kickstart expansion will need some trimming off the vertical part at the very back of the runner.... hence the clubman and snail suggestions...
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 8:55 pm
by Muttley McLadd
If you're worried about cutting Italion bodywork, just buy an Indion rear runner. They're pretty cheap.
Re: Exhausts that fit without bodywork modifications?
Posted: Tue Mar 29, 2011 10:39 pm
by eibargum
Ralph Saxilby clubman.
Re: Exhausts that fit without bodywork modifications?
Posted: Wed Mar 30, 2011 9:17 am
by AUSSIE
reason is just got my scoot a sprayed and looking lovely..... and forgot about the exhasuts during the dry build....Doh!
heartbreaking to hack at fresh paint and im in the market for a new pipe