No one in mailand europe seems to have this in stock.
I UK I've only found it at Cambridge Lambretta but their p&p for mainland EU is 67£
Does anyone know of a better source to get hold of one?
Crankshaft MecEur 58/116 GP cone
________________________
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
-
carlos fandango
- registered user
- Posts: 792
- Joined: Wed Jan 07, 2009 12:51 am
- Location: Stourbridge
- Contact:
try readspeed , i don't know if they are in stock though? Hes had a load of cranks made by the same company that make meceur ones.
When i was young my Mom said "if you haven't got anything nice to say, say nothing at all " ..................... and people wonder why I'm quiet around them !
-
corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
Is this the one you want ...
http://www.scooter-center.com/scoweb/pa ... URBELWELLE
I've got one of those in stock. £120.00
Where abouts in Europe are you and I'll get you a shipping quote?
Check the different pictures though. They have no big end shims and although it says perfect for RB20 kits I don't think I would use one without shims in an RB.
http://www.scooter-center.com/scoweb/pa ... URBELWELLE
I've got one of those in stock. £120.00
Where abouts in Europe are you and I'll get you a shipping quote?
Check the different pictures though. They have no big end shims and although it says perfect for RB20 kits I don't think I would use one without shims in an RB.
It's rather this one : http://www.jockeys-boxenstop.de/shop/pr ... 8-116.htmlcorrado wrote:Is this the one you want ...
http://www.scooter-center.com/scoweb/pa ... URBELWELLE
I've got one of those in stock. £120.00
Where abouts in Europe are you and I'll get you a shipping quote?
Check the different pictures though. They have no big end shims and although it says perfect for RB20 kits I don't think I would use one without shims in an RB.
I'm rebuilding a tv175 S3 http://tv175.wordpress.com/ and I want it original with 116 and 58 but with a gp cone to easier add modern electronic ign kits on it.
And the benefits of a stronger cone. It seems though that crankshafts with 116 and GP cone are hard to get at the moment. Cambridge is the only one in stock but its twice the price of anyone else and the shipping is hilarious.
I live in Sweden, Stockholm.
________________________
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
Lambretta LiS150 1965 - MBGM RT195 w/MBGM Clubman & Keihin PWK28
Lambretta TV175 1962 - GranTurismo 200 w/MBGM Clubman & Dellorto PHBH 28
http://tv175.wordpress.com/
-
corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I would say that the one I have, the scooter center one, the Cam Lam one and the Jockey's one are all the same.
Unless they use Yamaha rods [which I don't believe they do, being Italian] then all the MEC rods are 116 mm, the Jockeys are showing a generic picture of a MEC crank but the 107 version as that has the steel coloured rod, all the 116 rods are Bronze / Copper in colour. The description of the scooter center one must be wrong, it will be 116 rod and not 115. I measured mine and it measures 116mm.
The best price I can get to ship to Sweden is £29. Based on 5kg parcel, 25 x 25 x 20 with adequate insurance.
Unless they use Yamaha rods [which I don't believe they do, being Italian] then all the MEC rods are 116 mm, the Jockeys are showing a generic picture of a MEC crank but the 107 version as that has the steel coloured rod, all the 116 rods are Bronze / Copper in colour. The description of the scooter center one must be wrong, it will be 116 rod and not 115. I measured mine and it measures 116mm.
The best price I can get to ship to Sweden is £29. Based on 5kg parcel, 25 x 25 x 20 with adequate insurance.