Just bought a disassembled T5 project with a rebuild engine with a new 152 Polini kit.
This will be run with a Sip expansion on the original carb with no further porting/modifications.
What would be a good starting point jetting wise? main 125/130?
T5 Polini 152
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
-
smiffy1968
- registered user
- Posts: 100
- Joined: Thu Mar 31, 2011 11:58 am
- Main scooter: Nevermind Mk1 T5
- Location: Ipswich
- Contact:
I ran my 152 on a 126 main jet, was only running on a hollowed out Simonini though. You are in the right ball park though. Good luck!
I think you'll end up around the 120 mark.
Better to be someone for a day than no-one for a lifetime