p200 crank-px125 case
-
- registered user
- Posts: 306
- Joined: Sat Aug 01, 2009 2:11 pm
- Main scooter: Vespa PTS1E
- Contact:
P2 inlet web is wider, so either machine casing to accept lip on crank, (best way as you can run a wider inlet port), or machine lip off crank.
P2 also has 5mm longer rod (110mm) and 1mm bigger (16mm) small end.
Im running a 60mm P2 crank in my Malossi 166 'crosser' engine.
P2 also has 5mm longer rod (110mm) and 1mm bigger (16mm) small end.
Im running a 60mm P2 crank in my Malossi 166 'crosser' engine.
-
- registered user
- Posts: 192
- Joined: Sun Dec 13, 2009 12:46 pm
- Main scooter: gp 283 kx
- Location: clitheroe lancs.
- Contact:
well thats the direction i was thinking . iv got an old polini 177 and my ep piston is 3mm shorter and runs a 16mm pin . so this looks a cheep way to gain power and reliability! gona have a home made reed aswell .
i have a horrible feeling.things are going to go bang