Any ideas on where's best to buy an exhaust and downpipe for a Series 2?
After a decent original style but I've seen some shockers advertised with very poor welding. Think mine is too far gone to re-use.
Cheers!
S2 exhaust
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Try Scootopia in Weston Super Mare. Got mine from them and it's a beauty.
- vegansydney
- registered user
- Posts: 223
- Joined: Wed Jan 28, 2009 8:52 am
- Location: New York City
- Contact:
Tutto Lambretta make the best quality OEM exhausts (& rims, seat covers) only second to NOS. Scootopia/Scooters Originali/Olimpia stock Tutto Lambretta parts.
http://www.tuttolambretta.it/index.asp
http://www.tuttolambretta.it/index.asp
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Thanks for the replies.
I've had a look on Scootopia but they only have Series 3 ones in stock looks like.
Might have a look around for non standard ones- any suggestions on some cool moddy ones?!

I've had a look on Scootopia but they only have Series 3 ones in stock looks like.

Might have a look around for non standard ones- any suggestions on some cool moddy ones?!

- Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Well; I was going to say use a standard S3. It might give it a bit of a boost. But if it's Mod you want you're probably not interested. 

- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Bet that makes a racket! Looks well made tho
What about this? Will it be worse performance wise compared to a standard and is it big enough if I wanted to upgrade to a 175/ 185?
http://www.scooteremporium.com/displayp ... ory_id=221
What about this? Will it be worse performance wise compared to a standard and is it big enough if I wanted to upgrade to a 175/ 185?
http://www.scooteremporium.com/displayp ... ory_id=221
how quick do you want it? ....I'm considering having a batch of series 1/2 expansions made up
Its in bits scooter club: www.facebook.com/groups/132415046859320
- onefortheroad
- registered user
- Posts: 148
- Joined: Wed Feb 11, 2009 7:35 pm
- Main scooter: Li125 series 2
- Location: Hull
- Contact:
Was looking to rebuild over the next month or two?
What have you got planned?
Basing it on something already or a totally new design?
What have you got planned?
Basing it on something already or a totally new design?
new pipe but based on an existing cone pattern ..........if enough interest mind
Its in bits scooter club: www.facebook.com/groups/132415046859320