Page 1 of 1

Bridge piece fixing kit

Posted: Wed Feb 16, 2011 6:43 am
by tha83
I know I have seen a kit which make removing and replacing the bridge piece a snap. I just can't find who sells this. Also, has anyone tried the Extended Exhaust bolt kit that Andy Francis sells? Does it make it easier to get at the bolts? I have a Taffspeed exhaust and the left side bolt is a bitch to get at.

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 7:08 am
by Toddy
Try this guy Map (graham robson) [email protected] he developed and sells them also chiggy stocks them if you have a look at his lambretta inovations website

Hope this helps

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 8:48 am
by red
This is the link to Chiggy's site

http://lambrettaupgrades.co.uk

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 10:51 am
by joee
Toddy wrote:Try this guy Map (graham robson) [email protected] he developed and sells them also chiggy stocks them if you have a look at his lambretta inovations website

Hope this helps

used them brilliant bit of kit

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 1:52 pm
by fairspares
tha83 , if you havnt got hold of the bridge piece fixing kit , i have a new kit paid £14 a couple of years back and never used it , its yours for £8 inc postage .
Image

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 5:07 pm
by tha83
Fairspares, I'll have that. I'm in San Francisco, so post will be a tad more I'm sure. I did find them at LTH which excited me cause I'll be in Stuttgart in May. Looks like their havin' a soul All-Nighter this weekend. I'll miss that.
As far as the extended exhaust nuts with the safety wire, has anyone tried them and will they collide with the "spring-loop" welded to the header flange on a Taffspeed pipe? I guess I can contact Andy Francis, he's got a money back guarantee and all, I'm just tires of "loose nuts"! :bigsm:

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 6:39 pm
by fairspares
il find out how much p&p and let you know asap.

Re: Bridge piece fixing kit

Posted: Wed Feb 16, 2011 8:41 pm
by tha83
Thanks Fairspares. I've PM'd you my specifics.

Re: Bridge piece fixing kit

Posted: Fri Feb 18, 2011 9:15 am
by Special X
The extended exhaust nuts with lockwire holes should be fine with a Taff exhaust as they were originally a Taffspeed part.