Splash Guard...........Yes or No
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Is there really any point in having one?? Later Injun ones had holes drilled in 'em, so no point really!! And without one, would you get better cooling to the downpipe? Discuss
Compact Toolbox Flywheel Holder
personally i don't bother with them ..extra weight and all that
seriously though i cant see the point as they don't really keep much crap off the motor and cooling can only be better for it ,unless you want originality
seriously though i cant see the point as they don't really keep much crap off the motor and cooling can only be better for it ,unless you want originality
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
Triken
- registered user
- Posts: 18
- Joined: Wed Jan 07, 2009 7:31 pm
- Main scooter: 200cc Trike
- Location: South Cumbria
- Contact:
The trike doesn't have a splash guard - full stop. I have put a front mudguard on to protect the hand brake parts from the worst of the road crap. As for better cooling of the down pipe? The trike engine is sideways, so the barrel and head point to the side, not forward. I have fitted an air box scoop on the bottom of the cylinder cowl, having cut a crescent shape hole in the cowl , points forward, air flows well through the scoop, cools the down pipe nicely.
they're designed to stop the exhaust rusting,or at least slow it down,so yes for me everytime.
unless you're using a stainless expansion
fred
unless you're using a stainless expansion
fred
- Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
AND, some of the stainless splashguards look super with something cool cut into them. Like Lambretta or TS1.soosh wrote:Isnt it good to keep the heat in the downpipe anyway?
CakeAndArseParty
-
fairspares
- registered user
- Posts: 361
- Joined: Thu Jun 24, 2010 7:48 pm
- Main scooter: Lambretta GP RB252
- Contact:
yes during winter months to stop rain / muck , no in summer months helps with engine cooling.
Fairspares Lambretta workshop.
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
yeah the exhasut gases should be kept as high temp wise as possible in the pipe so cooling of this is a no no. i believe this is why you see pipes on some cars/bikes wrapped in heat guard bandages...soosh wrote:Isnt it good to keep the heat in the downpipe anyway?
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
So why do motorbikes have a ring of extra cooling fins around the exhaust downpipe where it exits from the cylindersydduckett wrote:yeah the exhasut gases should be kept as high temp wise as possible in the pipe so cooling of this is a no no. i believe this is why you see pipes on some cars/bikes wrapped in heat guard bandages...soosh wrote:Isnt it good to keep the heat in the downpipe anyway?
Compact Toolbox Flywheel Holder
-
fairspares
- registered user
- Posts: 361
- Joined: Thu Jun 24, 2010 7:48 pm
- Main scooter: Lambretta GP RB252
- Contact:
most air cooled lambrettas suffer from cooling problems so i dont believe in wrapping the exhaust to keep as hot as possible , most exhaust wrap on cars is used to keep heat out of the engine bay.
Fairspares Lambretta workshop.
