And Now For Something Completely Different
The New Super Cool
Avanti TT3
It Runs At 30% Cooler than any other air cooled Lambretta Kit
(Test carried out at JB Tuning on 13th May 2011)
Finally after 18 months of design and development we can now release the details of the all new Avanti 225 TT3, not since the TS1 has there been such a radical design change, not one but THREE.
1. The first Lambretta cylinder to give over 30% more radial fin cooling area than an Innocenti
External cylinder temperature on the Dynamometer at JB tuning 90 degrees C
Other well known kits run at 140 degrees C+(source: JB Tuning)
2. The first Lambretta production produced centrally bridged exhaust port
3. The Unique MWO transfer port, conventional transfer fed 3rd port opposite the exhaust port
100% designed and manufactured in England apart from the Mitaka piston which has a standard compression height, designed by us and specially manufactured for the Avanti kit so as to fit any standard 107mm conrod crankshaft.
Price £525.00 for the whole kit
Will be available Mid- end of August
Further details & Technical information go to: http://www.supertune.co
Avanti TT3
better start saving then
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
All the best with this Ron it looks great..im saving with mark..
Ricspeed, gone but never forgotten RIP my friend #59
At Diadlo's 23.9 bhp in standard form ALL DETAILS & Graphs &........................coaster wrote:I like the look of that too, special head cowling I presume?
What sort of powewr outputs can we expect Ron?
www.supertune.co
Hi Guy's
No more pm's please for 2 weeks as I am off on holiday early tomorrow, if you send in e-mails they may get answered.cheers
No more pm's please for 2 weeks as I am off on holiday early tomorrow, if you send in e-mails they may get answered.cheers
-
- registered user
- Posts: 811
- Joined: Sat Jan 17, 2009 9:17 pm
- Location: Barcelona, ESPAÑA
- Contact:
If your holiday destination is in Spain, may you bring one of those kits with you please?
All the best in this thrilling new adventure Mr. Moss.
Jaime
All the best in this thrilling new adventure Mr. Moss.
Jaime
-
- registered user
- Posts: 221
- Joined: Thu Jan 29, 2009 1:45 pm
- Location: Norwich
- Contact:
Hi Ron , Will this be a limited production run or will it be available for a few years ?
In short - How long do we have to save up
In short - How long do we have to save up
Je fettle - Tu fettle - Il fettle - Nous fettleons - Vous fettlez - Ils fettlent
"Broadsword calling Danny boy ,Broadsword calling Danny boy ,over "
"Broadsword calling Danny boy ,Broadsword calling Danny boy ,over "
-
- registered user
- Posts: 171
- Joined: Wed Jan 07, 2009 11:36 am
- Main scooter: GP200E Ron Moss Supertuned !
- Contact:
I think you'll find it's to clear the frame tube, yes, the barrel is THAT big !!coaster wrote:I notice the fins near the inlet port are cut back, in readiness for a reed manifold??
Old Lambrettas Never die ..................... they just go Faster !
Ron Moss says "Supertune it !"
Ron Moss says "Supertune it !"