The New Super Cool
Avanti TT3
It Runs At 30% Cooler than any other air cooled Lambretta Kit
(Test carried out at JB Tuning on 13th May 2011)
Finally after 18 months of design and development we can now release the details of the all new Avanti 225 TT3, not since the TS1 has there been such a radical design change, not one but THREE.
1. The first Lambretta cylinder to give over 30% more radial fin cooling area than an Innocenti
External cylinder temperature on the Dynamometer at JB tuning 90 degrees C
Other well known kits run at 140 degrees C+(source: JB Tuning)
2. The first Lambretta production produced centrally bridged exhaust port
3. The Unique MWO transfer port, conventional transfer fed 3rd port opposite the exhaust port
100% designed and manufactured in England apart from the Mitaka piston which has a standard compression height, designed by us and specially manufactured for the Avanti kit so as to fit any standard 107mm conrod crankshaft.
Price £525.00 for the whole kit
Will be available Mid- end of August
Further details & Technical information go to: http://www.supertune.co
