Scooterotica

I want to give my ss180 a bit more mph and put a sports exhaust on it, whats the best one to use and who sells them ? cheers

woody wrote:I want to give my ss180 a bit more mph and put a sports exhaust on it, whats the best one to use and who sells them ? cheers

Hello Woody , do you want a "look like stock" exhaust or a really sport one (loud & big) ? , if your engine is stock , I think the SIP road is the best solution ,but the diameter of the exhaust tube is not the same on PX and SS....

http://scootrs.com/moreinfo.cfm?Product_ID=1917

this'll give you some more options. i think SIP has them as well.

captaincavern wrote:

woody wrote:I want to give my ss180 a bit more mph and put a sports exhaust on it, whats the best one to use and who sells them ? cheers

Hello Woody , do you want a "look like stock" exhaust or a really sport one (loud & big) ? , if your engine is stock , I think the SIP road is the best solution ,but the diameter of the exhaust tube is not the same on PX and SS....

I,ve got a ken cobbin exhaust on at the moment and it looks and sounds great but slows the scooter down so i,d really like something retro looking not too modern also
i know the downpipe diameter is different but is the spacing for the exhaust bolt different too ?

guygrrr wrote:http://scootrs.com/moreinfo.cfm?Product_ID=1917

this'll give you some more options. i think SIP has them as well.

Thanks guygrr , this should open up options for me ,is the exhaust bolt to downpipe spacing the same as a p2 ?

woody wrote:

captaincavern wrote:

woody wrote:I want to give my ss180 a bit more mph and put a sports exhaust on it, whats the best one to use and who sells them ? cheers

Hello Woody , do you want a "look like stock" exhaust or a really sport one (loud & big) ? , if your engine is stock , I think the SIP road is the best solution ,but the diameter of the exhaust tube is not the same on PX and SS....

I,ve got a ken cobbin exhaust on at the moment and it looks and sounds great but slows the scooter down so i,d really like something retro looking not too modern also
i know the downpipe diameter is different but is the spacing for the exhaust bolt different too ?

Yes ,spacing is the same ,i've put a SS exhaust on a P200 engine (reducing to 42mm the cylinder exhaust tube) and the bolt fit just fine on the engine . So I think the opposite will work just the same

guygrrr wrote:http://scootrs.com/moreinfo.cfm?Product_ID=1917

this'll give you some more options. i think SIP has them as well.

i,ve bought one of these and they,ve sent the wrong one , the one that came isn,t stepped as in the picture and as so is too small for a p2 exhaust to tighten up on . I,ve tried emailing them and had no response has anybody else used them before ,cheers woody