cast iron barrel to piston clearance
Posted: Tue Dec 14, 2010 8:02 pm
are we all still agreed on 4 thou for a rebore
but go with 3.5 thou on ally barrelsScooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
cast iron barrel to piston clearance
Page 1 of 1
Re: cast iron barrel to piston clearance
Posted: Tue Dec 14, 2010 8:51 pm
i go with that on my sil 200's cos i dont do running in but go with 3.5 thou on ally barrels
but go with 3.5 thou on ally barrelsRe: cast iron barrel to piston clearance
Posted: Wed Dec 15, 2010 6:03 pm
I still go 3 thou...but, I also put a cople of hundred miles on each motor before it goes out the door, don't want them pesky customers ruining all that hard work 