Scooterotica

I have decided to resurrect my old and trusty MK1 P2 which was tuned by Norrie Kerr in the late 80's, at the time it was fitted with an 11 port Mallossi 210 top-end, NFK reedvalve matched to a 30mm Delly, modified PK flywheel, fuel pump, T5 fourth gear and a Micron exhaust with a Harry Barlow end can.

Now the exhaust is missing it's downpipe and looks a bit worse for wear unfortunately, so I am keen to hear what people recommend as the best pipe for the engine spec I have. I have seen an old German review of Vespa exhaust's that rated the RZ and SIP very highly for a good spread of power across a wide range.

So... is that review still valid in saying those exhausts are the best money can buy...?

Dont think you could go to far wrong with either of them

The right hand exit JL is highly rated. Transformed my girlfriends 180 compared to the Simonini it had before.

Thats my vespa knowledge 'exhausted' ...sorry Ill get my coat

got an MSC micron thats surplus to requirements (200 fitting) down pipe is a bit dented, but usable, no dents or splits in the chamber, and all bracketry there. 80"s pipe for an 80"s bike. 50 quid and its yours if interested. it"s 80"s chrome as well

PM sent mate...