Lectron Carbs

[TED CRUD]

I am Thinking of using a Lectron carb ,i have seen these carbs on Scooters are the any good and who is using one


https://www.google.co.uk/url?sa=t&rct=j ... 8443,d.ZG4

[corrado]

I'd definitely use one on my RB sprint engine if I could find one at the right money. Artie at Foxhat [who built my RB] rates them highly.

[Rally220]

They look the 'dogs' them, and no messing about with jetting etc. Is it really that easy to set them up?

[dapper]

There was a thread about Lectron carbs a while back. Do a search. Think it was in the last 18 months, but I am on old fecker, so probs about 5 years ago

[TED CRUD]

https://www.google.co.uk/url?sa=t&rct=j ... 6UjdMFmxdg


just found /read it

[TED CRUD]

Another one to look at
https://www.google.co.uk/url?sa=t&rct=j ... 4634,d.ZGU

[TED CRUD]

Just Delivered ,looks like it will be a while before it gets used

[mick1]

How are these carbs different from cheaper Tillotson carbs ??

[TED CRUD]

I don't know about different, i have read reviews watched you tube .They Perform really well on the Honda CR 250, it makes sense to me as I am going to use this Barrel on my GP

[dapper]

Video 8 was interesting where he used a digital laser temp guage (which I happen to have ) to measure EGT. I suppose you'd point it at the down pipe around 10cm. from the flange and see what temp you get. Adjust the carb to get the lowest reading at tickover and then see what temps occur at different throttle positions. What would be suggested EGT for an Avanti kit? I imagine someone out there has an EGT fitted to an Avanti by now.