PHBH carb - out of the box

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Anyone know what jets/needle/etc is in a PHBH when it comes out of the box, unmolested?

Seems dealers are a bit cagey about telling me.. Seems they want to double the price to sell me more unsuitable bits.

I've sussed a 40 slide is standard. The best answer I've got so far is that they come jetted 'rich'. Not overly helpful..
CakeAndArseParty
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Speak to Eurocarb, www.dellorto.co.uk you can order it prejetted to what you want at no extra charge I believe.
Turn On, Tune In, Cop out!
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Still about twice the price of SIP though.

I'm just curious about which atomiser/needle they come with. I'm realistic about having to get a slack handful of main jets and pilots.
CakeAndArseParty
Ian Hepworth

Muttley McLadd wrote:Still about twice the price of SIP though.

I'm just curious about which atomiser/needle they come with. I'm realistic about having to get a slack handful of main jets and pilots.
There are about 20 different 28 and 30mm PHBH carbs. With adjuster screws on one side or the other, rubber mount, solid mount etc.
Then they all have different combinations of atomiser,needle,main, choke, idle.
All for different OEM applications.
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Cheers fella.. nobody else could tell me that.

I'm after a 30mil, rubber mount. I was under the impression (one dealer told me..) that the adjuster screws only come on the one side.

I'll order a handful of needles and atomisers too then :)
CakeAndArseParty
rocho68
Dealer
Posts: 261
Joined: Mon Feb 08, 2010 4:36 pm
Location: darlaston
Contact:

talk to cambridge lambretta , very helpfull and will send what you reqiure !!!!
Ian Hepworth

Muttley McLadd wrote:Cheers fella.. nobody else could tell me that.

I'm after a 30mil, rubber mount. I was under the impression (one dealer told me..) that the adjuster screws only come on the one side.

I'll order a handful of needles and atomisers too then :)
The adjusters come on both sides. If there is a D in the part number it normally means the adjusters are on the right (D=destra, Italian for right).
If there is an S it's left (S=Sinistra, Italian for left).
User avatar
corrado
Dealer
Posts: 2588
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:

Just opened up a couple of my stock, factory fitted with ...........

PHBH 26. BS
Main 110
Pilot 50
Choke 70
Slide 40
Needle X7
Atomiser AV266

PHBH 30. BS
Main 115
Pilot 55
Choke 70
Slide 40
Needle X2
Atomiser AS266

HTH.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 6 guests