Page 1 of 4
Familiar with this disk brake?
Posted: Thu Oct 21, 2010 9:42 pm
by DaveInPortland
As shown here on the Beedspeed site.
http://beedspeed.com/product_info.php?c ... ts_id=8533
Good? Shite? Who makes it?
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 9:45 pm
by soulsurfer
Looks like the ScootRS one. Do yourself a favour and make sure you buy ScootRS if you want this type of brake, I believe Beedspeed sell them as does Corrado
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 9:50 pm
by RICSPEED
just bin the shite rubber hose
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 9:58 pm
by mark
thought beedspeed sold spaq,buy from corrado to be safe
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 9:59 pm
by Andy Pickering
soulsurfer wrote:Looks like the ScootRS one
Ye just pulled mine out the box..(really gotta fit the fecker)..lol, and its the same as my scootrs one but with braided hose and mines anti dive, main thing is
Nissin Brake Components
..
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 10:02 pm
by Speed Demon
If it is from Beedspeed then it is unlikely to be a ScootRS one because I believe they fell out (can't imagine how that might happen
) and is probably from A.N.Other Viet source.
ScootRS ones - I believe - are now only supplied with genuine Nissin master cyl and calipers. Not sure if the same applies to the other manufacturers. There have been some failure problems with replica master cyl and calipers so prob best to stick with someone who supplies Nissin.
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 10:10 pm
by Bilko
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 10:13 pm
by Andy Pickering
Speed Demon wrote:can't imagine how that might happen
MEEEEEEEEEEEOOOOOOOW..lol..
Re: Familiar with this disk brake?
Posted: Thu Oct 21, 2010 11:44 pm
by adriang
Saigon scooters also use the nissen components. I reckon that both Saigon Scooters and ScootRS get them from the same supplier (Sterling perhaps).
Re: Familiar with this disk brake?
Posted: Fri Oct 22, 2010 12:09 am
by corrado
DaveInPortland wrote:
Who makes it?
That's a Sterling version. Scootrs has a double cut out on the caliper mounting bracket that the drum hub stub seats into making the hub sit more central. As far as I know it's a unique feature on the scootrs one. Scootrs also come with polished lever and s/s hose (which I'd still swap for a Hel one from Chiggy) and the latest ones have the Innocenti "I" cut into the caliper mounting plate....... and it may have been mentioned
but scootrs are not sand cast.
