Won't run with an air filter?!

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Robi D
registered user
Posts: 163
Joined: Thu Jan 29, 2009 9:08 pm
Location: Amherstburg, Ontario, Canada
Contact:

I recently bought a new air filter and carb kit for my Li 150 ser. 2. The scoot runs great with the filter hooked up but as soon as I clip it in place fully it kills the scooter.
Any ideas?
I ran this scooter for years with the old filter and bellow hooked up but the bellow was rotted and didn't seal against the filter, so I decided to hook it up properly and this is what I get?!
Cheers
bristolmod
registered user
Posts: 1741
Joined: Wed Jan 07, 2009 8:42 am
Main scooter: Lambretta TV175 S3- what else!
Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
Contact:

sounds like its been running with a "leak" for years.

Over time, has someone altered the jetting to make it work? I would check jets etc first and revert back to what they should be if thats the cause

Chris
Scootering since 1968.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests