Page 1 of 1
Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 8:12 pm
by lockman69
Could anybody please tell what the 3 Gems on the head set are supposed to indicate
Red
Blue
Amber
It’s a non indicator Series 80 and none of the gem/lights work, before I go through the wiring it would be a good idea to know which gem to wire up to which circuit.
No doubt there may be a few more Serveta questions to come
Cheers
Re: Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 8:18 pm
by RICSPEED
blue - main beam
amber - indicators
red - nutral( a guess)
Re: Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 8:32 pm
by lockman69
Cheers Ric
Amber / indicators? It’s that a guess or a fact?
This old Spanish bitza is not fitted with indicators
It’s easier finding Hens teeth than finding any factual information about these later Serveta’s
Cheers
Re: Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 8:38 pm
by RICSPEED
well the standard colour for indicators ..jap or whatever is usually green .. indian gp had blue and amber ..main and indicators ..so a bit of a guess
Re: Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 9:09 pm
by Supereibar
Ric is actually spot on with the amber matey... Fact is, you will find indicator switches on scooters that have no indicators, or indicator housings on scoots that didnt have any.. So, no wonder. Also, the neutral switch was not used in all models, even thou if the engine had a neutral switch.
Regards,
Jaime
Re: Serveta Series 80/Lince question
Posted: Mon Oct 11, 2010 10:07 pm
by eibarlad
Green- neutral, Red- high beam. I had a jet from new 81.
Re: Serveta Series 80/Lince question
Posted: Tue Oct 12, 2010 9:41 am
by lockman69
Cheers guys, that helps.............I think lol!