Scooterotica

Sorry if your getting bored with me posting these but I've freaking loads of 'em!!

This is our latest test of the new (Fast road) ADS5 Vs a JL4.

Engine spec is a full on JB TS240, Welded trans, additional trans/boost, V Force, Alpha crank, MB Inlet, MB centre plug head, 35mm Mikuni........pretty much eveything ya could put on ya xmas list!! I've seen the reciept for this baby as well...... !!


Firstly HP.



Then Torque.



Again really chuffed with how its worked out.

These are not available as yet, still checking them out on different setups.

It is Martins intention over the winter months to build up plenty of stock of all pipes for 2011.

PS

Just for fun these are the results of the same motor against our Rally ADS3 pipe. Two totally different pipes, same motor......interesting results.





Interstingly if you had two exactly identical engines with appropriate gearing, one with the ADS3 Rally pipe and the other the JL4. Which do ya reckon would be the fastest on a typical mid week mayhem session......????????

Sorry if your getting bored with me posting these

£eck no, im learning so much more Ads

Which do ya reckon would be the fastest

red one

A JL 4 on that type of engine the power output topping out at just over 7,000 rpm is not what I would have expected at all but on those results the Ads pipe looks quite impressive.
PS. I bet it's a lovely bike to ride on the road

Don't stop posting, I can't get enough of these, learning lots too.

Nice one Ads. Just clarify for us teh pipes availavle then.

ADS3 is touring yes? ADS5 is fast road correct? So im presuming the other one was the 'race' version, and must be an ADS4 ......have i got those details correct?

I'd love to see all 3 pipes on this motor, back to back against a JL4 and a JL3........the ultimate exhaust comparison tests i reckon!! lol

If Martin dont have time, bring em to me and i'll run em up for you guys to help out. ;o)

Rally pipe look awesome 22 bhp at only 6000 rpm.

Yeah keep up the good work Ads, just to help the simple folk like me can you add delivery dates and cost for the following (you will also need to add the numbers/prefixes you use to identfy the pipes to each so we know what ones you mean). As I didnt know when your RB,s one would be coming out i have just brought a Franspeed race but will still be up for the equivalant ADS one when ready...

For TS
ADS rally
ADS fast Road
ADS Race

For RB
ADS rally
ADS fast road
ADS race

Adspeed wrote:Sorry if your getting bored with me posting these but I've freaking loads of 'em!!

This is our latest test of the new (Fast road) ADS5 Vs a JL4.

Engine spec is a full on JB TS240, Welded trans, additional trans/boost, V Force, Alpha crank, MB Inlet, MB centre plug head, 35mm Mikuni........pretty much eveything ya could put on ya xmas list!! I've seen the reciept for this baby as well...... !!


Firstly HP.



Then Torque.



Again really chuffed with how its worked out.

These are not available as yet, still checking them out on different setups.

It is Martins intention over the winter months to build up plenty of stock of all pipes for 2011.

PS

Just for fun these are the results of the same motor against our Rally ADS3 pipe. Two totally different pipes, same motor......interesting results.





Interstingly if you had two exactly identical engines with appropriate gearing, one with the ADS3 Rally pipe and the other the JL4. Which do ya reckon would be the fastest on a typical mid week mayhem session......????????

JL4 all the way

lammy250 wrote: JL4 all the way

That ol' dinted JL4 won't be on for long old lad, you know it!!

Right the numbers thing......its evolved in a way that now the numbers are kinda out of sync but here they are.

...................TS/CAST..............RB
Race..............ADS1................ADS2
Rally..............ADS3................ADS4
Fast Road.......ADS5................ADS6 (Not available just yet )

I know some of you guys are wanting to try the Rally pipe on ya RB's but as yet non available. Sorry about this but its still busy on the pipe sales front and Chisels has all on supplying the pre booked ones. Next order is due next Saturday I believe.......all bar one are already ordered!!
As you can imagine the TS/Cast ones have more potential for sales but the RB ones are a priority over the next few months. Hopefully over the winter Martins gonna fill the place with'em!! To be hoped people still want them next year!!

TS/Cast race pipes available now