hi as title says , ive been building an autovespa conversion for about 2 years on & off , im now at a complete standstill & just cant get the motor ( skipper st4t125) to spark. ive bought all new components stator, regulator, coil, cdi unit & a secondhand wiring loom i even put the motor in a local auto scoot repair place & he couldnt make it spark either ,,,,
any sugestions /advice welcome
electrical help/advice
4 stroke ?
the cdi may well have an immobiliser so unless you have the ignition switch ,key and cdi to match it will never run .....pm do an un immobilized version ..about a ton
the cdi may well have an immobiliser so unless you have the ignition switch ,key and cdi to match it will never run .....pm do an un immobilized version ..about a ton
Its in bits scooter club: www.facebook.com/groups/132415046859320
maybe frank sanderson can help or series 6 forum
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
- rondon
- registered user
- Posts: 104
- Joined: Sat Sep 18, 2010 7:01 pm
- Main scooter: autovespa
- Location: jarrow
- Contact:
i spoke to beedspeed today , they do a unimobilised cdi for this motor £170 my question now is ( forgot to ask while on the phone ) would i be able to use this cdi without an ignition & key & just use a flick switch
Holly s**t it's got teh rust
if you want a flick swich ....yesrondon wrote:i spoke to beedspeed today , they do a unimobilised cdi for this motor £170 my question now is ( forgot to ask while on the phone ) would i be able to use this cdi without an ignition & key & just use a flick switch
sure pm tuning do em cheaper
Its in bits scooter club: www.facebook.com/groups/132415046859320
Its in bits scooter club: www.facebook.com/groups/132415046859320
- rondon
- registered user
- Posts: 104
- Joined: Sat Sep 18, 2010 7:01 pm
- Main scooter: autovespa
- Location: jarrow
- Contact:
cheers ricspeed, looks exactly the same , same part number etc but doesnt state if its unimobilised,, the same one on beedspeed site says clearly that it bypasses the imobiliser,, i,ll ring pm tomorow |& se what they sat ( ive only spoke to pm once before & didnt find them very helpfull or polite comsidering i was just about to spend `£400 + )
ill share the info i get & update pics of wiring instalation etc for anyone ellse strugling with this same problem
ill share the info i get & update pics of wiring instalation etc for anyone ellse strugling with this same problem
Holly s**t it's got teh rust
02-M5512524 Malossi Digitronic CDI - Piaggio 125cc - 210cc 4T without Imobiliser £136.24
Its in bits scooter club: www.facebook.com/groups/132415046859320
got this if its any help
Its in bits scooter club: www.facebook.com/groups/132415046859320