Does anyobe know where I might be able get some? I need about 8 with the thread all the way up to the head.
Cheers,
Matt
M8 x 35mm countersunk allen head bolts?
is there not a fixings supplier near you?
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
You could cut these down...
http://cgi.ebay.co.uk/M8-x-45-stainless ... 45ef461a9a
http://cgi.ebay.co.uk/M8-x-50-High-Tens ... 2ea7501c2e
http://cgi.ebay.co.uk/6-pcs-M8-x-50-STA ... 2309d3a0f8
...or use these
http://cgi.ebay.co.uk/M8-x-35-BLACK-COU ... 23024c5ea0
http://cgi.ebay.co.uk/M8-x-45-stainless ... 45ef461a9a
http://cgi.ebay.co.uk/M8-x-50-High-Tens ... 2ea7501c2e
http://cgi.ebay.co.uk/6-pcs-M8-x-50-STA ... 2309d3a0f8
...or use these
http://cgi.ebay.co.uk/M8-x-35-BLACK-COU ... 23024c5ea0
Turn On, Tune In, Cop out!
-
dirtyhandslopez
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
Link is no good.
That's not going anywhere...
-
JOHNNY
- registered user
- Posts: 38
- Joined: Wed Jan 07, 2009 6:30 pm
- Main scooter: Full carbon fibre RB270 gp
- Contact:
Try a company called stagonset they are a online just google them i use them for all my fastners i got every bolt , washer , spring washer , dome and nyloc nuts you need and then some to rebuild a lammy and vespa for about £80 and all in stainless