Page 1 of 1
carb settings reqd. for ts1 and 30mm phbh
Posted: Wed Sep 08, 2010 12:57 pm
by mickdale
anyone point me in the right direction for a ts1 230cc with 30mm PHBH carb
(running a big bore clubman but reckon a jl3 or taffy might be in the right ballpark)
cheers
mick
Re: carb settings reqd. for ts1 and 30mm phbh
Posted: Thu Sep 09, 2010 9:13 pm
by ricalnic
how about
AV266 atomiser
X2 needle
53 Pilot
132 main
45 slide
on my monza 225, with Franspeed
Re: carb settings reqd. for ts1 and 30mm phbh
Posted: Fri Sep 10, 2010 2:20 pm
by mickdale
thanks ricalnic and diablo
am getting results with:
53 pilot
AV266
X13 needle on 2nd clip
40 slide
150 main (to be safe before dyno)
is the x13 needle with AV266 RICHER all the way through the rev range than X2 needle with AV264 ?
thanks
mick