EGT Conundrum
Posted: Thu Aug 26, 2010 5:15 pm
When measuring the 100mm for the probe, which point do I go from here?
Do I measure from the 44mm, 35mm or in the middle?
Do I measure from the 44mm, 35mm or in the middle?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
EGT Conundrum
Page 1 of 1
Re: EGT Conundrum
Posted: Thu Aug 26, 2010 5:51 pm
Hey Bilko, it's from the piston face. The best way to measure is to use a piece of wire
Re: EGT Conundrum
Posted: Thu Aug 26, 2010 6:28 pm
Thanks Mike. On the case now.