Scooterotica

I have a couple of stripped casing threads where the bracket for my Taffy pipe mounts.
What size helicoils will I need and where's the best place to get em from?

Thanks

PM cezeta he knows a good brand!!

you could try step studs,tap the hole 7mm and just screw step stud in,
i think 8mm to 6mm are also available,
regards
joe

m6 thread insert,such as helicoil. check on e bay.
used 'em for years.

The main exhaust side casing studs are 8 x1.25 mm only early series 1&2 are 6mm

jimmo wrote:I have a couple of stripped casing threads where the bracket for my Taffy pipe mounts.
What size helicoils will I need and where's the best place to get em from?

Thanks

Is that the tailpipe end or exhaust body end?

i thought he meant muffler bracket,heliciols good for ali thread repairs.

fred wrote:i thought he meant muffler bracket,heliciols good for ali thread repairs.

Yes Fred, its the 3 that hold on the rear bracket for the end can.

So I go for the m6 inserts then?

Should get those on ebay?