Scooterotica

Any ideas people on what could have caused this??













New piston and 60mm crank 150 miles ago , was running smooth , jetting was fine after i put the feeder jet back into the idle system . The mrs has christenend me Team AAspeed!!!!!

Christ ya don't do things by halves do ya Baz?
I don't think I've got anything remotely like that on my shelf of shame! No idea whats caused it.

Found the problem , was indeed the ring peg , same happened on my RB 20 , Nobody ask me to put there lottery numbers on Oh it's Asso piston RB spec 1mm rings.

You'll be on the phone to AF on Tuesday then Baz?

PMSL that's me mate!!!!
Think i well may have to fella, Andy's on his hols too , just hope the outcome will be the same as when the RB bit the dust

BAZMAN put a monza 225 piston in from CAM LAM far better piston i run all my bikes with em now

Me too, new S-Monza piston looks far better.

stafford wrote:BAZMAN put a monza 225 piston in from CAM LAM far better piston i run all my bikes with em now

Me too but you'll need to reprofile your head as the crown is flatter.

Cheers guys , thinking off e-baying it , pig sick

Might hold off from e-bay....
AF's supplied me with new piston and barrel under warranty , good service again