Its a lesser spotted FOXHAT 260 TS1!!
Posted: Tue Jul 20, 2010 8:54 pm
EBAY - 
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Its a lesser spotted FOXHAT 260 TS1!!
Page 1 of 4
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Tue Jul 20, 2010 9:32 pm
ADS....get it bought then dyno it....
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Tue Jul 20, 2010 9:39 pm
Lam46 wrote:ADS....get it bought then dyno it....
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Tue Jul 20, 2010 9:41 pm
Thats some serious bit of kit right there and i will be interested to see what it goes for..
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Wed Jul 21, 2010 12:43 am
its only a 252, i thought they did a true 260?
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Wed Jul 21, 2010 11:53 pm
jb does a true rb 260 i just asked about one for mine but the crank is just over 700 quid
to have one made so i am stopping at 252 for the moment well this year anyway
to have one made so i am stopping at 252 for the moment well this year anyway
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Thu Jul 22, 2010 8:10 am
Yep its a 252cc, I prefer the sound of 252 over 260 for some reason. The Vespa GT300 is only something like 275cc!! 
Its only done 10 miles and its on ebay
When I look at that barrel I just don't see the port area to produce 30hp. I may be wrong. As for transfer timings after jacking up a TS1 to go with a 62mm crank won't they be a little high. Get ya port calculators out, at best maybe with -1mm deck hieght? (std barrel is 46mm from top of barrel to top of transfer I think)
Asked the chap if he had a graph to show the 30hp he said its just what he got told.
Is this the 'big spigot real deal' we've been waiting for?
Its only done 10 miles and its on ebay
When I look at that barrel I just don't see the port area to produce 30hp. I may be wrong. As for transfer timings after jacking up a TS1 to go with a 62mm crank won't they be a little high. Get ya port calculators out, at best maybe with -1mm deck hieght? (std barrel is 46mm from top of barrel to top of transfer I think)
Asked the chap if he had a graph to show the 30hp he said its just what he got told.
Is this the 'big spigot real deal' we've been waiting for?
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Thu Jul 22, 2010 4:51 pm
Gone for the full £700............... 
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Fri Jul 23, 2010 8:04 am
Saw one of these a while back on ebay and there was a pic taken down the inlet to show the construction of the bridge, it is purely made from the sleeve hence a big flat bridge within the intake tract.......Can't be good for Gas flow.
Re: Its a lesser spotted FOXHAT 260 TS1!!
Posted: Sat Jul 24, 2010 12:53 pm
did you also notice the exhaust jennyboo! looks very much like the one someones saying he's developed