Page 1 of 1

Series 2 Battery type Rectifier/Junction Box

Posted: Tue Feb 17, 2009 11:02 pm
by rog60
Does anyone have picture of the which coloured wire goes to which connection on the top of the box. It is an original S2 rectifier/junction box with no colours marked on the top. I know that 'Sticky's and some home workshop manuals show the connection colours for S3 boxes but I can't find anything for S2????

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Wed Feb 18, 2009 7:09 pm
by craig69
With the fuse facing you mine goes,
back row from left to right, blue , brown , green , purple
front row from left to right, grey , brown , green , red

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Wed Feb 18, 2009 9:41 pm
by Zikes
Image

Not sure if this is what you wanted?

Picture taken from the front of my TV 175 S2.

--
Edit:
But you're probably asking about "the black box" at the back... Sorry. I'll take a picture for you this weekend if it's still interesting.

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Wed Feb 18, 2009 10:45 pm
by J1MS
It will be the one bolted to the out rigger at the rear of the scooter the junction for stator/loom. took mine off and did a 12 volt conversion and havnt now got the details to hand. I think its 3 wires in and 4 wires or is it 5 wires out :? :roll: dont have info too hand but if needed will look and see if I can dig out my notes.. All the best 8-) 8-)

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Wed Feb 18, 2009 11:44 pm
by rog60
Thanks for prompt response and yes it is the box on the rear foot board strut, however the picture you have supplied may also come in handy for the front (behind headlight) junction. Thanks to all who have replied. :D :D :D :D

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Thu Feb 19, 2009 2:17 pm
by lammydave
bit fuzzy i'm afraid...

Image

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Thu Feb 19, 2009 2:21 pm
by rog60
Not sure if that one also applies to TV175 S2 but I will try it anyway, many thanks

Re: Series 2 Battery type Rectifier/Junction Box

Posted: Thu Feb 19, 2009 11:18 pm
by rog60
Many thanks to all replies to this post. Problem solved. :D :D :D :D :D