I have got a zinc plating kit but no instructions, whats in the kit has is as follows
A 100w Heater
Zinc brightner additive
Copy cad + zinc crystals
SD-Klene S416 (Caustic free)
Zinc plate
I would think copy cad and zinc brightner toghether with water with a charge (DC) one end to Zinc and other to object to be plated (not sure which side is live)
and the SD-klene and Heater, to clean the object first.
Any one with any experiance??
Zinc plating
-
- registered user
- Posts: 11
- Joined: Wed Jun 09, 2010 11:37 pm
- Contact:
- jonny snatchsniffer
- registered user
- Posts: 277
- Joined: Mon Jan 12, 2009 11:53 am
- Location: camberley, surrey
- Contact:
only at school but it got me on the case so i hope this helps
http://www.finishing.com/faqs/howworks.html
http://www.finishing.com/faqs/howworks.html
-
- registered user
- Posts: 11
- Joined: Wed Jun 09, 2010 11:37 pm
- Contact:
jonny snatchsniffer wrote:only at school but it got me on the case so i hope this helps
http://www.finishing.com/faqs/howworks.html
Thanks mr snatchsniffer (very nice name, one can relate to it)