Engine swap question.
-
taff763
- registered user
- Posts: 26
- Joined: Mon Nov 01, 2010 11:31 pm
- Main scooter: Vespa P200E 1980
- Location: Anglesey
- Contact:
I have taken a 200cc engine out of my scoot and replacing it with a 125cc. Will the exhaust off the 200 be ok on the 125 engine or is there to much difference with the size if the carb/jet set up???
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
exhaust stub size is different .the 200 is bigger.
Sean Brady Scooters - 01765 690 698
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Eh?sean brady scooters wrote:exhaust stub size is different .the 200 is bigger.
If it's the same type exhaust port layout on both cylinders then it will fit fine, I wasn't aware that they were different on a 200, just dependent on cylinder type or kit, but what pipe is it?
Turn On, Tune In, Cop out!
-
vesbrettas
- registered user
- Posts: 55
- Joined: Tue Jun 09, 2009 2:33 pm
- Contact:
exhaust will not fit stub different size and in a different place, some expansions you may be able to get a down pipe for if the chambers are the same if its standard it requires welding and some bits from other exhausts a lot eaisier to just change the exhaust