Wiring Query - Please Help
Posted: Sun Jun 06, 2010 5:43 pm
Looking for some advice on wiring.
Have a Series 3 bitsa that i am building from scratch - new loom, elect ignition, switches, ignition etc. All parts are new and now fitted but even after reading Sticky's book I am stuck on 2 of the wires and where they go within the headset. I have Green/Black/Brown coming from the loom - no problems there, but from the light switch I have Red/Blue/Orange/White. Where does the orange go?
From the ignition I have Red/Pink(earth)/Blue/Yellow/Green/Black/Brown - where does the yellow go?
Any help greatly appreciated.
Oh, its non-battery by the way.
Cheers.
Have a Series 3 bitsa that i am building from scratch - new loom, elect ignition, switches, ignition etc. All parts are new and now fitted but even after reading Sticky's book I am stuck on 2 of the wires and where they go within the headset. I have Green/Black/Brown coming from the loom - no problems there, but from the light switch I have Red/Blue/Orange/White. Where does the orange go?
From the ignition I have Red/Pink(earth)/Blue/Yellow/Green/Black/Brown - where does the yellow go?
Any help greatly appreciated.
Oh, its non-battery by the way.
Cheers.