Drum Brake Spindle
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Is there any way a large bolt could be used as a spindle in a Lambretta drum hub instead of the usual affair with nuts either side?
Turn On, Tune In, Cop out!
-
wack 63
- registered user
- Posts: 1254
- Joined: Fri Nov 27, 2009 9:33 pm
- Main scooter: '71 GP TS1
- Location: Lincs
- Contact:
I wouldn't have thought so as the backplate will knock back and forth on the link peg possibly breaking the boss off.I have the PM tuning twin disc that has a bolt for the axle and quite honestly it is a pain in the arse to get everything back in the links and then tighten up.When I have time I'll try and find a longer axle and go back to the standard arrangement.
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
I'm not using the link peg, using antidive but you just reminded me, I used to have the PM single disc antidive 
Turn On, Tune In, Cop out!