Scooterotica

Hi could anyone advise on what jet settings for my mikuni tm24 are best suited for a mugello 186 with a PM Pipe.

I have an SX150 with (I think from memory 46/17 sprockets), old Fresco, MB road tuned SR190, so I'd suspect you'll need to go up on what I have.

185 main, 4Dh7 needle 2nd clip (the 5N13 needle was too rich for me), 17.5 pilot about 2 or 3 turns out. It liked the 17.5 pilot better than the 15 which i know many people with similar set ups run.

Hope this helps as a start

cheers storkfoot thanks for your help