Page 8 of 9
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 6:43 pm
by CPH Lambretta
Hi Snake,that sounds like a perfect set up, what carb are you running on it?
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 7:19 pm
by DigDug
slangen wrote:£495 is what the original mk4 taffy costed new, it's still on taffy site but "out of stock"
I bought an immaculate mk4 of the bay last week for £300. It's a lovely combo with my gt186. Pulls sx200 gearing easy.
I have one fitted by Ian on a Taffspeed tuned Imola - agreed it is a lovely piece of kit.
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 8:41 pm
by slangen
CPH I don't know if you mean me but I run a phbl25.
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 10:21 pm
by CPH Lambretta
Yes Slangen it was you I meant. Doesn't Slangen mean "The Snake"?
I always fancied this set up, GT 186/25mm phbl and an ADS3 or Taffy pipe.
Re: Taffy copy pipe
Posted: Wed Mar 26, 2014 6:24 am
by LI225Canada
Glad to see I am not the only one fighting with my exhaust.
Cut/Weld/Grind/Paint/Torch/Repaint/Hammer....
Ahh the things we do for our scooter,... and to save a few quid/dollars.
http://servetalambrettarebuild.blogspot ... rt-12.html
Re: Taffy copy pipe
Posted: Thu Mar 27, 2014 9:41 pm
by simonwwfc
This is the main issue I think the two different stub sizes
Re: Taffy copy pipe
Posted: Thu Mar 27, 2014 9:43 pm
by simonwwfc
On my last gp running imola 186 I had a black stub fitted , this time I've got same as chrome stub that's nearly 1" taller
Re: Taffy copy pipe
Posted: Thu Mar 27, 2014 9:52 pm
by CPH Lambretta
Yes thats exactly your problem. The pipe is pushed down at the front so goes up at the back.
Re: Taffy copy pipe
Posted: Thu Mar 27, 2014 9:59 pm
by shocky
Has a pigeon s**t on the crome one !!!
Re: Taffy copy pipe
Posted: Thu Mar 27, 2014 10:22 pm
by simonwwfc
Why on Muggelo 186 kits is the short black stub fitted and on the Muggelo 200 small block they use the chrome stub any ideas
