Scooterotica

Posted: **Thu Oct 14, 2010 4:12 pm**

dapper wrote:Right, all those that have shown an interest have now been sent PMs. Please don't forget to include your postal addy.
I'll welcome any comments about the tool and its ease of use, or possible improvements but remember, I am a soft southerner and don't have a thick skin so be gentle. I tried it against a long finned flywheel at Wicksteed, and it would appear to require 35mm. bolts instead of the 30mm. I mentioned earlier in the thread. Also, please remember, I did say I wasn't sending out the bolts as well

Posted: **Thu Oct 14, 2010 4:27 pm**

Toddy wrote:
dapper wrote:Right, all those that have shown an interest have now been sent PMs. Please don't forget to include your postal addy.
I'll welcome any comments about the tool and its ease of use, or possible improvements but remember, I am a soft southerner and don't have a thick skin so be gentle. I tried it against a long finned flywheel at Wicksteed, and it would appear to require 35mm. bolts instead of the 30mm. I mentioned earlier in the thread. Also, please remember, I did say I wasn't sending out the bolts as well

Oh alright Toddy, I'll see if I can find two bolts for you, ya big crybaby

Posted: **Thu Oct 14, 2010 4:34 pm**

dapper wrote:
Toddy wrote:
dapper wrote:Right, all those that have shown an interest have now been sent PMs. Please don't forget to include your postal addy.
I'll welcome any comments about the tool and its ease of use, or possible improvements but remember, I am a soft southerner and don't have a thick skin so be gentle. I tried it against a long finned flywheel at Wicksteed, and it would appear to require 35mm. bolts instead of the 30mm. I mentioned earlier in the thread. Also, please remember, I did say I wasn't sending out the bolts as well

Oh alright Toddy, I'll see if I can find two bolts for you, ya big crybaby

Thanks mate

Posted: **Wed Oct 27, 2010 2:39 pm**

Those that have sent cheques will be receiving their tools by 2nd. Class post shortly. Posted out today lunchtime with proof of posting.

Peach X1
Toddy X1
Soulsurfer x2
li150x1
Hectorx1
Scottx1

Instructions inside Jiffy bag. Any problems/issues let me know. Hope (for my sake) you are pleased with them and make good use of them (except on the road)

Bilko, you showed an interest but never received owt from ya?? I have two more here for anyone interested, but no bolts/nuts.

Posted: **Wed Oct 27, 2010 4:51 pm**

s**t! Seeing the post title has just reminded me!

Sorting it now. Sorry mate, it completely left my head.

Posted: **Wed Oct 27, 2010 10:39 pm**

ONE MILLION BLISTERING BARNICLES!!!!!! How on earth did I miss this post!?!?! Is it possible to still order one of these wonderful tools captain? Is the cost still the same for "late-maÃ±ana-a$$holes" from Spain?

J.

Posted: **Thu Oct 28, 2010 10:07 am**

Supereibar wrote:ONE MILLION BLISTERING BARNICLES!!!!!! How on earth did I miss this post!?!?! Is it possible to still order one of these wonderful tools captain? Is the cost still the same for "late-maÃ±ana-a$$holes" from Spain?

J.

Jaime, Ola, I'll try to find out what the postage cost is to Espana

Posted: **Thu Oct 28, 2010 10:19 am**

i'll have one off ya mate

Posted: **Thu Oct 28, 2010 11:16 am**

Posted: **Fri Oct 29, 2010 2:24 pm**

Thanks Mark The Spark, mine arrived today, good instructions, I like the Blu Tac tip too

Scooterotica

Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder

Re: Toolbox Flywheel Holder