Page 6 of 6
Re: Wiring Hoo Ha
Posted: Wed May 28, 2014 3:49 pm
by Bilko
Ok thanks mate. Starting to take it all apart now
Re: Wiring Hoo Ha
Posted: Wed May 28, 2014 4:32 pm
by dapper
And check for continuity between cables from one end of loom to the other in case there is a break somewhere in the loom.
Re: Wiring Hoo Ha
Posted: Wed May 28, 2014 5:16 pm
by firekdp
Bilko wrote:Been told it could be a short somewhere, so Im going to strip the Lambretta.
Easiest way to see if you have a short on a 12v DC. system is to check the fuse. If it isn't blown you don't have a short.
To check you don't have a break in the loom, connect the loom brown direct to one of the headlamp sockets, check the lamp and it's earth first.
Re: Wiring Hoo Ha
Posted: Thu May 29, 2014 9:37 pm
by Bilko
Thanks to everyone who helped here. Finally got it sorted tonight.
A tough combination of faulty ignition/dodgy battery and none standard set up was cracked by my mate tonight. I would never have got it in a million years.