Page 6 of 9
Re: Taffy copy pipe
Posted: Mon Mar 24, 2014 9:31 pm
by boris
Just had a look at dans photo of his taffy on an RT kit. His looks a little high as well I wonder if he has had any bother with his.
Sent from my HTC Sensation Z710e using Tapatalk
Re: Taffy copy pipe
Posted: Mon Mar 24, 2014 10:35 pm
by simonwwfc
Yes no wot u mean . I may look at something else now regards pipe
Re: Taffy copy pipe
Posted: Mon Mar 24, 2014 11:17 pm
by thebassmasta
i have had 2 of these pipes, and honestly ive had no problems with them at all. first one i bought from dan, the tail can sat a bit low for my liking. the second one i bought (after ive tried all the other pipes) was bought from fleabay and sits just right
Re: Taffy copy pipe
Posted: Mon Mar 24, 2014 11:19 pm
by boris
thebassmasta wrote:i have had 2 of these pipes, and honestly ive had no problems with them at all. first one i bought from dan, the tail can sat a bit low for my liking. the second one i bought (after ive tried all the other pipes) was bought from fleabay and sits just right
What kits have you had them on.
Sent from my HTC Sensation Z710e using Tapatalk
Re: Taffy copy pipe
Posted: Mon Mar 24, 2014 11:38 pm
by Chris-47
My mate is going to cut the bracket off on the pipe weld a new one on and the tail pipe sits at a better angle you can get roughly 3 fingers in the gap between the pipe and underneath the runners and you still have a good clear clearance from the ground to the underneath of the pipe this is roughly how it will sit
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 12:11 am
by boris
That's touching the kick start as you probably already know.
By the time its lifted clear of the kickstart and there is a slim scooter boy/girl sat on it.
That's still going to be close to the foot board.
Hope I'm wrong though.
Sent from my HTC Sensation Z710e using Tapatalk
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 1:14 am
by thebassmasta
First pipe was on version 2 mugello and the second pipe was on imola ultimate
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 7:17 am
by Chris-47
Yea it's near the kick start at the mo but that can b adjusted and in this position it will hit the bump stop not the footboard first
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 10:53 am
by camel
I bet TAFFSPEED are loving this...
Re: Taffy copy pipe
Posted: Tue Mar 25, 2014 11:17 am
by Arcadia
camel wrote:I bet TAFFSPEED are loving this...
I cant see why? They can start producing/selling them any time they like, its their choice not to. Maybe they will in future? Who knows?
These Taffy reps fill a gap in the market until that day though, and for £180 compared to £500 I'd rather have the copy. As far as I can see they look good, sound good and give good performance. A couple people seem to be having fitting issues, but their is only so much room for ANY exhaust to fit between the kick-start and runner board isn't there?