Scooterotica

captain kroozer is giles fielden

little bit of an up date for you all (and just to assure every one ive not quite got to the stage of aggrophobia)...as you may have read in this thread the scoot was hastily thrown together to get it to mallory test day ... well been chipping away at a few of the problems i found on track , the bars were one such issue .. (to high/far back and meant my weight was to far back and scoot just wanted to wheelie)

so first up was sort a gear change .. a modified cluch side support was kindly sorted by guy topper and the acompanying cable block by ade newham





then i had to sort clamps and plate ,clamps were again thanks to ade and duly shortend to suit , then an old mate simon came up trumps and sorted a plate on the old cnc .. even anodising it foc :bouncing:



allthough should have mentioned clamps were blue





still think ive s**t out on the bars them selves though so will be looking out for a more suitable pair ... was wanting then to sit in this position ..



next up is the anti dive home brew disc set up ..

ric ,will we see this on the track this year?

test day at Mallory 21st march .. certainly .. but the entry fee for cadwell for example is around £150 .. for that you get maybe 16 laps .. then fuel and so on .. we shall see but i cant promise as i still have alot to do not to mention the lc engine yet to pay for

i intend to get a day time mot though and get it registerd so you may see it out and about

great to see it up and running ,must get on with my projects .why does work get in the way and merry xmass :bouncing: :bouncing: :fb:

thats better....... just sat on it it feels so much better :bouncing:

gonna give it a quick blast tomorrow i think to try em out .. but at 102db ..not for long ..



edit ... ran s**t ..think the avgas has gone off

all tarted up ...

Short question for my personal interest - is it allowed to shorten the headstock tube in grp6?

Stampede wrote:Short question for my personal interest - is it allowed to shorten the headstock tube in grp6?

yes g6 is pretty much anything goes