Toolbox Flywheel Holder
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Yep, looks good, well done 
Turn On, Tune In, Cop out!
Nice...can i have one aswell mate.
-
methleymongo
- registered user
- Posts: 4
- Joined: Sun Oct 11, 2009 11:34 am
- Contact:
I'VE P.M.'D YA.......dapper wrote:Right, at long last I'm getting a batch of ten made to start with. I should be picking them up on Thursday and will try one against my own scoot first. I'll post a photo of the finished article. They will be £10.00 + P&P. If there is sufficient demand I'll get another larger batch made which may be a bit cheaper, so the tight b@5t@rds out there can wait for the guinea pigs to try them first at the more expensive rate
-
methleymongo
- registered user
- Posts: 4
- Joined: Sun Oct 11, 2009 11:34 am
- Contact:
methleymongo wrote:I'VE P.M.'D YA.......dapper wrote:Right, at long last I'm getting a batch of ten made to start with. I should be picking them up on Thursday and will try one against my own scoot first. I'll post a photo of the finished article. They will be £10.00 + P&P. If there is sufficient demand I'll get another larger batch made which may be a bit cheaper, so the tight b@5t@rds out there can wait for the guinea pigs to try them first at the more expensive rate
I DEFINATELY WANT ONE THOUGH!!!!!
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Right, as I'm at work tomorrow, I'll pop over to the PO to get one weighed in a Jiffy bag so I can advise P&P costs. I have nine ready to go out (Soulsurfer wants two, greedy beggar ). I'll PM those that have said they want one with my postal addy for cheques. Once cheque is received and cleared, tool will be posted. Anyone whose cheque bounces will be villified on here
). I'll PM those that have said they want one with my postal addy for cheques. Once cheque is received and cleared, tool will be posted. Anyone whose cheque bounces will be villified on here Compact Toolbox Flywheel Holder
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Right, P&P will be £1.32 for one tool or £1.59 for two posted out second class with proof of posting, all in a nice new Jiffy bag. All those interested will receive a PM with my postal addy.
Compact Toolbox Flywheel Holder
-
Toddy
- registered user
- Posts: 6222
- Joined: Sun Mar 08, 2009 12:01 am
- Main scooter: Lambretta Series 1
- Location: East Yorkshire
- Contact:
dapper wrote:Right, P&P will be £1.32 for one tool or £1.59 for two posted out second class with proof of posting, all in a nice new Jiffy bag. All those interested will receive a PM with my postal addy.
Thanks
As my Dad used to say "Each to their own lad"
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Right, all those that have shown an interest have now been sent PMs. Please don't forget to include your postal addy.
I'll welcome any comments about the tool and its ease of use, or possible improvements but remember, I am a soft southerner and don't have a thick skin so be gentle. I tried it against a long finned flywheel at Wicksteed, and it would appear to require 35mm. bolts instead of the 30mm. I mentioned earlier in the thread. Also, please remember, I did say I wasn't sending out the bolts as well 
I'll welcome any comments about the tool and its ease of use, or possible improvements but remember, I am a soft southerner and don't have a thick skin so be gentle.
I tried it against a long finned flywheel at Wicksteed, and it would appear to require 35mm. bolts instead of the 30mm. I mentioned earlier in the thread. Also, please remember, I did say I wasn't sending out the bolts as well Compact Toolbox Flywheel Holder