New SIL engine or build from empty casing?

[rosscla]

After a rummage under the desk and an order placed with MBs I reckon I'm up to 112, and that doesn't include exhaust and carb...

[rosscla]

Some further rummaging in the shed gets me to 126

[rosscla]

Now at 142, only brake parts missing now.

[warts]

Will you be going for the panel work next Ross?
Any idea how many bits in total to have a running rolling Lammy?

[rosscla]

Well, you never know, I might get this one running sometime...

Restos catalogue would be a good place to make a start, I have one in the office, I'll do some quick sums Friday when I'm back in there

And I really do not want to think about the cost

Though might consider a little borrowing is somebody came up with a late orbar rolling chassis, but harder to hide from the missus

[corrado]

and that doesn't include exhaust and carb...

Yes but they don't come with a SIL engine either.

2 x dowels @ 95p
14 x 6mm studs / nuts / washers @ 80p
2 x 8mm exhaust studs / nuts / washers @£1.20
= £15.50

Rolling total = A lot.

[rosscla]

Yes but they don't come with a SIL engine either.

2 x dowels @ 95p
14 x 6mm studs / nuts / washers @ 80p
2 x 8mm exhaust studs / nuts / washers @£1.20
= £15.50

Rolling total = A lot.

I got those studs with my casing