Page 4 of 4
Re: ts1 fuel %
Posted: Tue Feb 23, 2010 9:34 pm
by Andy Pickering
I always run my indian barrelled big carb/PM @ 4% have done for a while and wouldnt want to change that TBH also ran my TS1 @ that...have in past years ran @ less and have had nips but never with 4%...
Re: ts1 fuel %
Posted: Tue Feb 23, 2010 9:48 pm
by Dazza
3% semi synth rock oil chainsaw spec
Re: ts1 fuel %
Posted: Tue Feb 23, 2010 9:50 pm
by lee b
mines on 3 till run in,then can goto 2,but i wont,as said before its a matter of lubrication!
Re: ts1 fuel %
Posted: Thu Feb 25, 2010 12:43 pm
by lozmondo
A good lubricant is the secret to a happy ride
Re: ts1 fuel %
Posted: Thu Feb 25, 2010 8:58 pm
by lee b
my mrs says that!! yeh,i always buy decent fully synth oil,it aint worth riskin!!
Re: ts1 fuel %
Posted: Fri Feb 26, 2010 1:50 am
by Lazarus
I run on 3% semy synth with my 175 steel barrel tried 2% fully synth but it pinched up.
but just wanted to say my local shop recommends fully synth only to TS1/imolla/ fast high reving type kits and semy synth for every thing else
Re: ts1 fuel %
Posted: Fri Feb 26, 2010 12:19 pm
by johnd
I run 4% Denicol synth 100 kart racing oil in my RB, there is no build up of carbon, no oily tailcan, no wear on the lining and no wear on the big end. 3000 hard kilometers later.