ts1 fuel %
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
I always run my indian barrelled big carb/PM @ 4% have done for a while and wouldnt want to change that TBH also ran my TS1 @ that...have in past years ran @ less and have had nips but never with 4%...
Ricspeed, gone but never forgotten RIP my friend #59
I run on 3% semy synth with my 175 steel barrel tried 2% fully synth but it pinched up.
but just wanted to say my local shop recommends fully synth only to TS1/imolla/ fast high reving type kits and semy synth for every thing else
but just wanted to say my local shop recommends fully synth only to TS1/imolla/ fast high reving type kits and semy synth for every thing else
-
- registered user
- Posts: 185
- Joined: Wed Jan 07, 2009 7:53 pm
- Main scooter: 1970 Dl125
- Location: Belfast, Ireland
- Contact:
I run 4% Denicol synth 100 kart racing oil in my RB, there is no build up of carbon, no oily tailcan, no wear on the lining and no wear on the big end. 3000 hard kilometers later.