Re: Hydraulic hose route on Spanish Li150 S2
Posted: Sat Jan 20, 2018 11:51 am
It took for hours as i did not want to go mad like i normally do. Measure twice..cut once. Patience is a virtue i am trying to learn 
The hose looks good.
I havent enlarged the hole in the mudguard yet.
Or fitted the master cylinder to the headset.
But the cable looks fine and on running it down outside the mudguard it looks like it will be fine
I have to go work near bristol/bath for a week. A place called radstock. So will not make any progress until my return.
Next interesting thing am sure will be fitting the disk brake/wheel.
I have read a thread on here that they dont always sit central between the fork links
However thats another bridge to cross if needed at a later time
The hose looks good.
I havent enlarged the hole in the mudguard yet.
Or fitted the master cylinder to the headset.
But the cable looks fine and on running it down outside the mudguard it looks like it will be fine
I have to go work near bristol/bath for a week. A place called radstock. So will not make any progress until my return.
Next interesting thing am sure will be fitting the disk brake/wheel.
I have read a thread on here that they dont always sit central between the fork links
However thats another bridge to cross if needed at a later time