Starter Motor
- GP Kevo
- registered user
- Posts: 321
- Joined: Wed Mar 11, 2009 7:48 am
- Main scooter: 1969 150 DL / GP225 TS1
- Location: Warsaw
- Contact:
If I have to kick start my Aprilia RS 250 I'm not about to stop kickstarting my Lambretta! Still, if you are hadicapped or have a broken leg and you still want to ride....
-
- registered user
- Posts: 465
- Joined: Sun Mar 22, 2009 5:15 am
- Location: Richmond Virginia, USA
- Contact:
I have seen a few of those "asian' machines'(not worth the name scooter) with that starter set up. Yet another thing on them that only lasts for 50 miles. Purely used as a selling point.
That's not going anywhere...
this wud b a good kit to do,
but u need to get a starter that is 12volt,arrow head ,cwr,
that u can get off the shelf,
then we can start,
i can get the ring gear cut, and mod he mag flange,
will have to look at how to do the flywheel,
but u need to get a starter that is 12volt,arrow head ,cwr,
that u can get off the shelf,
then we can start,
i can get the ring gear cut, and mod he mag flange,
will have to look at how to do the flywheel,
-
- registered user
- Posts: 740
- Joined: Wed Jan 07, 2009 10:57 am
- Location: drax,near selby,north yorkshire
- Contact:
well at least one person is thinking on the same lines,twin wrote:this wud b a good kit to do,
but u need to get a starter that is 12volt,arrow head ,cwr,
that u can get off the shelf,
then we can start,
i can get the ring gear cut, and mod he mag flange,
will have to look at how to do the flywheel,
get cracking dave see if you can come up with something so that i can use all the case sides that have had the kickstart shaft hole welded up during my racing term.
best regards
joe
Joe, no kickstart pedal?
Looks like another exhaust needs designing, hmmm,
back to the drawing board then.
Looks like another exhaust needs designing, hmmm,
back to the drawing board then.
Old Lambretta's never die, they get tuned..................
-
- registered user
- Posts: 305
- Joined: Mon Jul 26, 2010 11:28 pm
- Main scooter: lambretta gp200
- Contact:

- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
still not managed to switch off the capitals then dave... 

Sean Brady Scooters - 01765 690 698