Page 3 of 3

Re: Saigon Scooter Centre parts - My review

Posted: Sat Nov 07, 2009 6:50 am
by saigonmark
I've got one of these clutches fitted to my RB20 along with a nylon lined cable and dogleg lever. Pat fitted it for me in his SSC workshop. It's got a silky smooth action and it has never slipped even at high revs. The biting point was right at the end of the travel but this settled down to a better position after I did a few km's. All the guys with performance kits run one over here. Highly recommended.

Re: Saigon Scooter Centre parts - My review

Posted: Fri Dec 11, 2009 10:17 am
by pasner
Any news/new experiences with the Saigon Clutch? Are the springs to hard? Im thingking of buying one for my ts1 project, any inconvinience? Thankx.

Re: Saigon Scooter Centre parts - My review

Posted: Sun Dec 13, 2009 1:25 pm
by grimspeed
ive just got a so called mikek style track system from ssc.
dosent look like on the web site.ie it follows a more
conventional path from the cylinder out to the left as sat on the scoot.
rater than the right then curling back and round.also looks bloody short.

Re: Saigon Scooter Centre parts - My review

Posted: Mon Feb 22, 2010 8:24 am
by joespeed
any one useing the saigon scooter clutch?will it stand 25hp and abuse?

Re: Saigon Scooter Centre parts - My review

Posted: Mon Feb 22, 2010 5:56 pm
by minotaur
i m using one in a RT220 with 30mm PWK, still running in, jetting etc. and not getting much use with the weather, first impressions are for the price i had to give it a go, :!: lovely smooth action and effortless and no slipping, ....not sure how long it will last but i hope it does cus i like a lot...