Scooterotica

No probs mate, will drop you a text and have a trundle round, prob in a couple of weeks or so if ok.

Excuse the dirt and the late response

What are the dimensions of these oil carriers, we have some coated thin steel & a rivet gun at work.

How have you attached it to the footboard strut on a series 2 diesel? Rear bracket goes to the number plate bolts I presume?

Rear onto number plate as you say,and front is attached to a bracket that originally held a circular electrical gizmo (shaped like a shoe polish tin, A rectifier I think) that has long since been removed

Thanks mate

CAN SOMEONE WITH ONE OF THESE ON A SERIES 3 GET THE TAPE MEASURE OUT & POST UP THE DIMENSIONS OF THESE PLEASE? (sorry about the caps)

Can i askk why people aere so exited about these there not a new idea they were areound in 1982 usually made from mesh like this type (round hole) http://www.perforated-metal.biz/Plain_S ... _Metal.htm and bent over a piece of 2x and a few bitstack welded to the sides

Yeah and we were all wearing Jam shoes...saw a lad about 16 with a pair on last week...

Stuff comes and goes, there's nothing new under the sun...