Scooterotica

Hello,

Some of you might have already seen it at Scooterist Meltdown in Kalkar or got it from their bgm dealer. But now it is as online version available as well. The bgm catalogue for 2013 and geared scooters:

http://issuu.com/scooter-center.com/doc ... _web-en1/1

Cheers everyone,

Philipp

Some great stuff in there Phillip!!

When will the one peice Lambretta lightened flywheel be available please??

Cheers

Rich

Hi Rich!

Thanks!

The flywheel will be ready around April. Both versions big and small taper will then be available!

Cheers Philipp

I've tried to find BGM Pro Racing 60mm crank for px200 with no success.
Does anyone have idea when those will be available again?

I just today received a new BGM stator, very impressed with the quality, a great product, well packaged, and well priced.

Im new to scooters but this has certainly made me want to take a look at more of your products in the future.

I bought a PWK BGM copy just a couple of weeks ago, very satisfied with the quality as well although the chrome on the slide looked a bit cheap, and I had to have the slide top replaced as it was cracked from delivery. The dealer replaced it immediately though so now everything is fine and it runs ridiculously well!

Philipp wrote:at the moment 60 mm stroke with 110 mm con rod is the only one vailable.

we have made different one of cranks for customers. mainly 115 mm rods.

if you are interested in one of these, contact your bgm man.

there seems to be demand for the 57 mm crank with standard 107 mm con rod. anyone?

cheers philipp

What about one for the RB 58 116

I would have one tomorrow. Have to go the PM tuning route now.

Hi Sydduckett!

The cranks with RD400 con rod are under preparation at the moment. We will have then with 58mm stroke and 60mm stroke for the future.

I don't have a confirmed delivery date though.

If you are in a hurry for the crank drop me a message and we can look into a solution!

Cheers Philipp

fitted BGM stator last night, perfect fit once I had manipulated the wiring around a bit to avoid trapping it in the mag housing.

great, the timing strobe lights stay rock solid, at all revs, unlike the SIL unit it replaced

i bought a set of px schockers, you have to file the front one to get it to fit at the bottom or it wont line up.