Page 3 of 8
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 3:33 pm
by mark
Sounds great, all I have to do is wait for pipe to be delivered then it's all go
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 5:41 pm
by Frautzi
mark wrote:Sounds great, all I have to do is wait for pipe to be delivered then it's all go
Look forward to the results and you sharing the holy grail middle of the road touring set up.
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 6:32 pm
by jason frost
Bilko wrote:I've been looking for someone to my Mugello 186 and so I've an interest in this thread too. Hope you get somewhere Mark
78mph at Elvington, V1 Mugello with abit of work
32mm carb JL4 and geared for racing not top speed.
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 6:35 pm
by jason frost
Frautzi wrote:
It has bags of torque realy happy with it.
5.2 bags of torque ? as long as you are happy
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 8:48 pm
by Frautzi
jason frost wrote:Frautzi wrote:
It has bags of torque realy happy with it.
5.2 bags of torque ? as long as you are happy
I know you scoff at my statment and i'm no stanger to sports bikes and others but.....
For a 40 year old scoot with a near standard motor
not fettled by anyone just matched and set by me and is my first scoot engine build other than and LD ...
I'm happy.......for now
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 8:58 pm
by bazman
They really do have bags of potential ( iron stage 4's) .
Jl3 or 4 mikuni tm24, 5.2 indian 200 gearing , tuned by mr brady , genuine 70mph .
Good thing was i could run the jl3 for touring and the jl4 for hooliganism and revs!!!
Re: tuning , who do i use
Posted: Wed Apr 27, 2011 11:42 pm
by corrado
jason frost wrote:Bilko wrote:I've been looking for someone to my Mugello 186 and so I've an interest in this thread too. Hope you get somewhere Mark
78mph at Elvington, V1 Mugello with abit of work
32mm carb JL4 and geared for racing not top speed.
Oi, 79.6 mph if you don't mind.
Re: tuning , who do i use
Posted: Sat Apr 30, 2011 6:59 am
by Special X
It was still on the 30 PHBH and that was before you tuned it further Jason. Basically my road muggy with a JL4 on it.
Re: tuning , who do i use
Posted: Sat Apr 30, 2011 7:08 am
by Special X
FREAK wrote:it was 200 stage 5 il 150 box 16/46 sprockets nk expansion phbh 30 ,mbd auto advance retard set at 23 ,18 (from memory) it sat naved at 87 mph and sat at 70 all day wish i still had it lol
So it sat at 7,000 rpm all day, Had it's top speed at aprox 8,350 rpm, and had at least 23/25 bhp at those revs to pull 87 mph.
From an iron barrel 200 . . . . . I'm impressed!!!!
Re: tuning , who do i use
Posted: Fri May 06, 2011 7:35 pm
by Andy Pickering
So in theory then...alloy barrel with iron liner..?