Scooterotica

i have tried the rest of the so called uprated clutches in my 30hp scooters riding hard every where!with the' rocha clutch' the lever is light not much heavier that a std clutch,the cost of this clutch is less that the competitors and can stand more power with less effort.
i have just ordered two more from lee, £ for £ i would say its the best value for money on the market!

Anyone got a number or email for Lee other than on here. Seems some people are getting through but not others (like me)..

Ta
Sef

It took a couple of days before I got a reply but only about 3 weeks before I recieved both my 5 and 6 plate clutches.

I`m building up a ts1 with the 5 plate and if it Works as good as the 6 plate I have on the RB22, I`ll be chuffed to bits.

Here is my 5 and 6 side by side comparison.



Ive had 4 clutches in my RB and none of them held the power. Eureka!

Just bought some new clutch plates for my service. Stripped clutch down and the corks look like brand new...no wear at all. All I replaced were the springs....good as new.

Are these clutches still available?

If Lee has the crownwheels I would say maybe yes.

Hi Slagen,

Spoke to Lee (Rocho) this afternoon and there will be NO more clutches available for the foreseable future as work and over commitments are taking most of his spare time up.

Mab

MAB wrote:Hi Slagen,

Spoke to Lee (Rocho) this afternoon and there will be NO more clutches available for the foreseable future as work and over commitments are taking most of his spare time up.

Mab

Shame that

MAB wrote:Hi Slagen,

Spoke to Lee (Rocho) this afternoon and there will be NO more clutches available for the foreseable future as work and over commitments are taking most of his spare time up.

Mab

Ok thanks for asking, that's sad as people seem happy with these clutches...